Steam cleaning is one of the most effective ways of removing dirt stains from your carpet. If you have decided to do it, there are things that you must know. Keep in mind that this process is not as simple as you might think and a piece of advice would make it only better. It is always better to take help from professional steam cleaning cronulla companies.
Where To Start
Before you start to steam clean the carpet, you must first prepare it. Start by removing everything that might get in the way. Remove all the toys and papers from the floor. Move the tables, chairs and the furniture out of the room so you get more clear room space. In case you can’t get the furniture out of the room, try to protect it from moisture by placing foil or plastic under its legs.
Dust the baseboards and vacuum the room. It will prevent extra dust from getting on the wet carpet. Vacuuming is also important because steam cleaning is meant only for small dirt in the fibers and it doesn’t remove hair and larger dirt particles. Also, it fluffs the carpet which makes steam cleaning more productive. Try to vacuum the entire room as impeccable as you can. The last part in preparing the room is to get rid of the bad spots. Use stain remover and blot it with a piece of white cloth or leave it to be sucked later on by the steam cleaner.
Fill the machine with hot water. Most steam cleaners have heating devices, but using hot water is better. Be careful not to overfill the tank. Next step is to add soap or detergent. Check the instruction to find out what the right kind of soap for the machine is and where it goes. Some steam cleaners have a special compartment and some require the soap to be mixed into the water.
If you prefer, you can use vinegar instead of detergent. It is a more natural solution and won’t affect you if you are sensitive to chemicals. The hot water should be in 50/50 proportion with the vinegar.
The best way is to start in the corner opposite the door. Begin to steam there and slowly work yourself out of the room. Remember that wherever you start you should not walk on the side that has already been cleaned. Read the instruction before starting cleaning. Some machines are meant to be pushed and others are meant to be pulled.
Steam cleaners are more efficient when you walk from wall to wall. Doesn’t use short back and forth move as with a vacuum? Every time you start a new line overlap a little the previous line so you don’t leave any uncleaned parts on the carpet. Move it slowly in order to allow it to work properly.
When finished – let it dry. Some carpets take up to 12 hours to dry. Make sure that no one steps on it before the water evaporates completely. If you truly value your health and you comfort, then a Carpet cleaning is a must. Keep these tips in mind and the next time you steam you’ll get a perfect result.